Stainless Steel Pharma Equipment

The Stainless Reactor is the core unit in the stainless steel equipment series for pharmaceutical and chemical processing. It is used in the petroleum, chemical, rubber, pesticide, dye,...

The Stainless Steel Foot Operated Bag Filter uses a corrosion-resistant stainless steel body and a foot-operated cover-opening mechanism. It removes suspended impurities through physical screening...

The two metering methods serve different process requirements. Level-based metering uses a level gauge, ultrasonic sensor, or pressure measuring instrument to monitor changes in liquid level and...

A Stainless Steel Buffer Tank helps reduce pressure fluctuations caused by pump start-up and shutdown or sudden valve closure. Depending on its design, it may use a compressed-air chamber, an...

The Stainless Steel Activated Carbon Adsorber uses activated carbon to remove pollutants from exhaust gases or water. In gas-phase applications, a fan moves exhaust through the adsorber, where...

Also known as a stainless steel filter press or plate filter, this unit is used for solid-liquid separation in the chemical, pharmaceutical, and food industries. Its threaded filter plate...

The Stainless Steel Falling Film Evaporator feeds liquid into the upper tube box of the heating chamber. A distribution device spreads the liquid evenly across the heat exchange tubes, where it...

A Stainless Steel Vertical Storage Tank is suitable for sites with limited floor space and sufficient height for installation. It is used in chemical, food, pharmaceutical, energy, environmental...

The saddle-supported horizontal design is suitable for facilities with limited headroom. It provides storage capacity without requiring the installation height of a vertical tank.

A Stainless Steel Shell and Tube Heat Exchanger transfers heat between hot and cold fluids without allowing them to mix. The fluids flow on opposite sides of the tube walls, with countercurrent...

The Stainless Steel Spiral Plate Condenser uses two parallel metal plates rolled into spiral channels, keeping the hot and cold fluids separate while allowing heat to pass between them. The spiral...

The Stainless Steel Bottom Entry Beating Tank is used for mixing and beating solid pigments in pigment and chemical plants. Its multi-stage agitation system combines straight rod, frame, and...